FAQ: How To Fix Pld Kitchen Cabinet Doors That Won’t Stay Closed?

How do you adjust old cabinet doors that won’t close?

Use a screwdriver to turn them both clockwise one-quarter turn at a time to add tension to the internal spring. Test the door. If it still won’t close, turn the adjusting screws one-quarter turn at a time until the door closes and stays closed. Open the door and let go of it, or push it slightly.

Why do my kitchen cabinet doors not close?

Often, the problem is that the rear adjustment screw has come loose, which makes the door sit askance. The front adjustment screw controls the distance between the hinge and the side of the cabinet. When this distance is too great, the cabinet door won’t close because it’s tilted.

Can you adjust soft close hinges?

Take a moment to focus on the soft close hinge and find the adjustment tab. Look for gray or silver plunger in the center of the hinge. To confirm that it’s the adjustment tab, try pulling on it with the tip of your finger.

Can you buy soft close hinges on old cabinets?

When you have a soft close model, you can replace the hinges, but it depends on the size of the cabinet door. You may also have the option of adding a plunger, if you cannot get the right door hinges.

You might be interested:  FAQ: What Wall Color Looks Great On A White Cabinet Kitchen With Pewter Glaze?

Can you put new hinges on old cabinets?

Unless you’re going to replace the hinges with the exact same type, you will need to cover the old holes and drill new ones. This job is best accomplished when you’re refinishing the cabinet. If the new hinges are close enough in style to the originals, you’ll want to use epoxy wood filler.

Are soft close hinges worth it?

They lessen the stress on the hinges and hinge plates over the years. In turn, you will extend the life of your beautiful new kitchen cabinets. If you’re going to spend a little extra money on a new kitchen, adding soft close hinges is definitely something you should consider.

Leave a Reply

Your email address will not be published. Required fields are marked *